View B39202B9815P810_8446366.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw filters for mobile communications series/type: b9815 the following products presented in this data sheet are being withdrawn. ordering code substitute product date of withdrawal deadline last orders last shipments B39202B9815P810 b39202b9825p810 2015-11-20 2016-03-01 2016-06-30 for further information please contact your nearest epcos sales office, which will also support you in selecting a suitable substitute. the addresses of our worldwide sales network are presented at www.epcos.com/sales.
2 may 3, 2011 b9815 1900.0 / 2017.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw 2in1 filter data sheet application n low-loss 2in1 rf filter for mobile telephone td-scdma 1900 and td-scdma 2100 systems n usable passband: filter 1 (td-scdma 1900): 40 mhz filter 2 (td-scdma 2100): 15 mhz n unbalanced to balanced operation for both filters n impedance transformation from 50 w to 200 w for both filters n low amplitude ripple n no matching network required features n package size 1.5 x1.1 x 0.4 mm 3 n moisture sensitive level 3 n rohs compatible n approx. weight 0.003g. n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) 0.18 0.175 0,39 bottom view 0.18 0.075 0.21 0.075 6 7 8 9 10 5 1234 side view 1.1 top view 0.49 0,4 1.5 pin configuration n 1 input [ filter 1] n 4 input [ filter 2 ] n 6,7 output balanced [ filter 2 ] n 8,9 output balanced [ filter 1 ] n 2,3,5,10 case ground 2,3,5,10 4 1 8 7 6 9
3 may 3, 2011 b9815 1900.0 / 2017.5 mhz saw components saw 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 1 (td-scdma 1900) temperature range for specification: t = -30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 200 w b9815 min. typ. @25?c max. center frequency f c 1900.0 mhz maximum insertion attenuation a max 1880.0 ... 1920.0mhz 1.6 2.0 db amplitude ripple (p-p) da 1880.0 ... 1920.0mhz 0.5 1.0 db input vswr 1880.0 ... 1920.0mhz 1.6 2.0 output vswr 1880.0 ... 1920.0mhz 1.7 2.0 group delay ripple (p-p) 1880.0 ... 1920.0mhz 8 18 ns common mode rejection ratio 1880.0 ... 1920.0mhz 20 1) 1) a cmrr of 19.6db corresponds to a phase balance of 10? together with an amplitude balance of 1.0db 27 db attenuation a 0.0 ... 925.0mhz 28 62 db 925.0 ... 960.0mhz 35 63 db 960.0 ... 1805.0mhz 28 41 db 1805.0 ... 1840.0mhz 30 35 db 1840.0 ... 1850.0mhz 32 44 db 1980.0 ... 2005.0mhz 15 29 db 2005.0 ... 6000.0mhz 28 37 db
4 may 3, 2011 b9815 1900.0 / 2017.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw 2in1 filter data sheet maximum ratings of filter 1 (td-scdma 1900) operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulse. v machine model, 1 pulse input power at 1880.0 ... 1920.0 mhz p in 10 dbm effective power in the on-state, 2010.0 ... 2025.0 mhz p in 10 dbm duty cycle 4:8, 2000hours
5 may 3, 2011 b9815 1900.0 / 2017.5 mhz saw components saw 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function filter 1 (td-scdma 1900) transfer function filter 1 (td-scdma 1900) - wideband
6 may 3, 2011 b9815 1900.0 / 2017.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw 2in1 filter data sheet smith charts filter 1 (td-scdma 1900) s 11 function s 22 function
7 may 3, 2011 b9815 1900.0 / 2017.5 mhz saw components saw 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 2 (td-scdma 2100) temperature range for specification: t = -30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 200 w b9815 min. typ. @ 25?c max. center frequency f c 2017.5 mhz maximum insertion attenuation a max 2010.0 ... 2025.0 mhz 1.7 2.6 db amplitude ripple (p-p) da 2010.0 ... 2025.0 mhz 0.5 1.2 db input vswr 2010.0 ... 2025.0 mhz 1.5 2.0 output vswr 2010.0 ... 2025.0 mhz 1.4 2.0 group delay ripple (p-p) 2010.0 ... 2025.0 mhz 8 20 ns common mode rejection ratio 2010.0 ... 2025.0 mhz 18 1) 1) a cmrr of 18.0db corresponds to a phase balance of 12? together with an amplitude balance of 1.2db 22 db attenuation a 0 ... 1840.0 mhz 45 50 db 1840.0 ... 1935.0 mhz 25 34 db 1935.0 ... 1970.0 mhz 22 25 db 1970.0 ... 1980.0 mhz 14 25 db 1980.0 ... 1990.0 mhz 6 12 db 2045.0 ... 2085.0 mhz 3 12 db 2085.0 ... 2120.0 mhz 22 25 db 2120.0 ... 2160.0 mhz 27 30 db 2160.0 ... 2300.0 mhz 35 37 db 2300.0 ... 2700.0 mhz 30 37 db 2700.0 ... 2900.0 mhz 30 35 db 2900.0 ... 6000.0 mhz 30 38 db
8 may 3, 2011 b9815 1900.0 / 2017.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw 2in1 filter data sheet maximum ratings of filter 2 (td-scdma 2100) operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulse. v machine model, 1 pulse input power at 1880.0 ... 1920.0 mhz p in 10 dbm effective power in the on-state, 2010.0 ... 2025.0 mhz p in 10 dbm duty cycle 4:8, 2000hours
9 may 3, 2011 b9815 1900.0 / 2017.5 mhz saw components saw 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function filter 1 (td-scdma 2100) transfer function filter 1 (td-scdma 2100) - wideband
10 may 3, 2011 b9815 1900.0 / 2017.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw 2in1 filter data sheet smith charts filter 1 (td-scdma 2100) s 11 function s 22 function
11 may 3, 2011 b9815 1900.0 / 2017.5 mhz saw components saw 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. references type b9815 ordering code B39202B9815P810 marking and package c61157-a8-a19 packaging f61074-v8227-z000 date codes l_1126 s-parameters b9815_lb_nb.s3p, b9815_lb_wb.s3p b9815_ub_nb.s3p, b9815_ub_wb.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maximum concentration values for cer- tain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2011. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
12 may 3, 2011 b9815 1900.0 / 2017.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw 2in1 filter data sheet t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B9815P810

	To Download B39202B9815P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .